Delphin Coder Bite Alarm Set, 3+1

Delphin Coder Bite Alarm Set, 3+1

Coder represents the new range of electronic bite alarms launched by Delphin in 2021. The alarms feature buttons for volume adjustment (the "V" dial - 5 levels of adjustment) as well as sensitivity (the "S" dial - 5 levels of adjustment). Additionally, the alarms have an intelligent "mute" function that allows you to set the sensitivity of the line and then turn the sound signal back on (5 different tones). Thanks to the universal thread, the alarms can be attached to any type of rod pod, tripod, buzz bar, or bankstick.

The electronic circuits of the alarms are encapsulated, providing them with a long lifespan. The alarms are equipped with the classic roller characterized by high sensitivity, effectively signaling the "Run" (the fish is moving away from the rod - the line tightens) and "Drop Back" (the fish is coming towards the rod - the line loosens) functions both visually and audibly. Each alarm comes with a standard socket for connecting the 2.5mm jack plugs of swingers or illuminated hangers.

The alarms include a function for automatic bite memory, with a special diode (upper right) signaling visually for 15 seconds (continuously) after each bite. The LED at the upper left is responsible for visual signaling of bites, with the option to select from 7 different colors for your preferred choice. The alarms can also set the LEDs as position lights (for night fishing) by briefly pressing the "Power" button.

The housing of the alarms and the station is made of shock-resistant ABS and features water intrusion protection. The alarms operate with a 12V LR23A battery, which ensures long-lasting performance. When the battery is low, the alarms emit a short beep. After fishing, it is recommended to remove the batteries and transport them separately.

The station features an automatic detection system with 4 channels (red, yellow, green, and blue) for easy alarm synchronization (the tone is identical to that of the alarm), a button for volume adjustment (the "V" dial - 5 levels of adjustment, including silent mode), and a button for tone adjustment (the "T" dial - 5 levels of adjustment). The metal switch with pin "On/Off" has a dual role: it turns the station on/off (tilting to the left), and moving to the right activates the vibration function. In the central position, the switch turns off the station.

The station operates with a 9V battery and has a built-in memory diode that signals visually for 15 seconds (continuously) after each bite. When the battery is low, the station emits a continuous beep. On the side of the station's housing, there is a button marked with the letter "P" used to synchronize the alarms with the station.

Turning the alarm on and off: Press and hold the red "Power" button (located at the bottom of the housing) for two seconds. When the alarm turns on, it emits 3 beeps, and both LEDs will blink 3 times. When you turn off the alarm, it will emit a single beep and the LEDs will blink once.

Setting the alarm tone: With the alarm off, press and hold the red "Power" button for 5 seconds. The alarm will emit 3 short beeps and a distinct fourth longer one. After this signal, release the button and select the desired tone using the "S" dial. To confirm the selected tone, turn off the alarm by pressing the red "Power" button for two seconds.

Setting the LED colors: With the alarm off, press and hold the red "Power" button for 5 seconds. The alarm will emit 3 short beeps and a distinct fourth longer one. After this signal, release the red "Power" button and then briefly press it again. By turning the "S" dial, you will select the desired LED color. To confirm the selected color, turn off the alarm by pressing the red "Power" button for two seconds.

Position LEDs for night fishing: With the alarm on, the position LEDs can be turned on or off by briefly pressing the red "Power" button.

Pairing the alarm with the station: With the station off and the alarm on, press and hold the "P" button on the side of the station's housing. At the same time, switch the pin switch to the ON position (left side). Hold the "P" button until the blue and red LEDs light up. When these LEDs are lit, release the "P" button. Now quickly press the "P" button to select the desired color and simulate a bite on the alarm you wish to pair. To successfully finalize the pairing, turn the station off and then on again.

Testing the range: With the alarm off, press and hold the red "Power" button for 7 seconds. The alarm will emit 3 short beeps and a distinct fourth longer one. Hold the button until you hear a quick continuous beep and the LEDs start to flash. Now you can move away from the alarm with the station to determine the exact distance it can receive the signal.

NOTE: The actual operating range of the alarms and the station is approximately 140m, depending on usage conditions (surrounding terrain, vegetation density, battery capacity). Both the alarms and the station are sold in a hard plastic transport case, lined inside with foam material that provides protection against mechanical shocks and dirt. The station and alarms have water protection at the speakers. The standard LED colors for the alarms are as follows: red, yellow, and green.

WARNING!

- Although the alarms are designed to work in any weather conditions, do not submerge them in water!
- If you do not use the alarm or station for a long period, it is advisable to remove the batteries;
- Do not screw the alarms tightly onto the supports to prevent potential damage;
- Although the signal range of the alarms is very wide, we suggest staying close to the rods.

Alarm Features:

• Water-resistant ABS housing;
• Sensitivity adjustment button ("S") - 5 levels of adjustment;
• Volume adjustment button ("V") - 5 levels of adjustment;
• "Mute" mode can be selected (from the "V" button);
• 5 different tones (selection is made using the "S" dial);
• 7 different colors for the visual signaling LED;
• Visual and audible signaling for "Drop Back" type bites;
• Visual and audible signaling for "Run" type bites;
• Automatic bite memory;
• Memory LED - signals continuously for 15 seconds;
• Position LEDs for night fishing;
• Encapsulated circuits with water protection;
• Socket for 2.5mm jack plug;
• Universal mounting thread (with rubber protection);
• Low battery indicator - short beep;
• Operates with a 12V LR23A battery (not included).

Station Features:

• Water-resistant ABS housing;
• Metal On/Off pin switch;
• Volume adjustment button ("V") - 5 levels of adjustment;
• Tone adjustment button ("T") - 5 levels of adjustment;
• "Mute" mode can be selected (from the "V" button);
• Vibration mode (activating the switch to the left);
• 4 signaling LEDs for bites;
• Visual and audible signaling for "Drop Back" type bites;
• Visual and audible signaling for "Run" type bites;
• Automatic bite memory;
• Memory diode - signals continuously for 15 seconds;
• Encapsulated circuits with water protection;
• Low battery indicator - continuous beep;
• Operates with a 9V battery (not included).