Delphin Coder Bite Alarm Set, 2+1

Delphin Coder Bite Alarm Set, 2+1

Coder represents the new range of electronic bite alarms launched by Delphin in 2021. The alarms feature buttons for adjusting the volume (wheel "V" - 5 levels) as well as sensitivity (wheel "S" - 5 levels). They also include the smart "mute" function, allowing you to adjust the line sensitivity and then restart the sound signal (5 different tones). Thanks to the universal thread, the alarms can be attached to any type of rod pod, tripod, buzz bar, or stake.

The electronic circuits of the alarms are encapsulated, providing a long lifespan. The alarms have the classic spool characterized by heightened sensitivity, efficiently signaling the "Run" function (fish moving away from the rod – line tightens) and the "Drop Back" function (fish moving towards the rod – line loosens) both visually and audibly. Each alarm is equipped with a standard socket for connecting a 2.5mm jack plug for swingers or light hangers.

The alarms have an integrated bite memory function, with a special diode (top right) lighting continuously for 15 seconds after each bite. The LED on the top left handles the optical bite indication, with 7 different colors available to select your favorite. The alarms also allow setting the LEDs as position lights (for night fishing) by briefly pressing the "Power" button.

The housing of the alarms and the receiver is made from shock-resistant ABS and offers protection against water ingress. The alarms operate with a 12V LR23A battery, capable of long operation. When the battery is low, the alarms emit a short beep. After fishing, it’s recommended to remove the batteries and store them separately.

The receiver features an automatic detection system with 4 channels (red, yellow, green, and blue) for easy synchronization of alarms (the tone matches the alarm’s), a volume control button (wheel "V" - 5 levels, including silent mode), and a tone adjustment button (wheel "T" - 5 levels). The metal pin switch "On/Off" has a dual role: turning the receiver on/off (tilt left) and activating vibration mode (tilt right). In the center position, the switch turns the receiver off.

Powered by a 9V battery, the receiver includes a special memory diode that lights continuously for 15 seconds after each bite. When the battery runs low, the receiver emits a continuous beep. On the receiver’s side is a button marked "P" used for synchronizing the alarms with the receiver.

Turning the alarm on and off: Press and hold the red "Power" button (located on the bottom of the housing) for two seconds. When the alarm turns on, it emits 3 beeps and both LEDs flash 3 times. When turning off, the alarm emits a single beep and the LEDs flash once.

Setting the alarm tone: With the alarm off, press and hold the red "Power" button for 5 seconds. The alarm will emit 3 short beeps and the fourth one distinctly longer. After the signal, release the button and select your desired tone using the "S" wheel. Confirm the tone by turning the alarm off by holding the red "Power" button for two seconds.

Setting the LED color: With the alarm off, press and hold the red "Power" button for 5 seconds. The alarm will emit 3 short beeps and the fourth one distinctly longer. After this signal, release the red "Power" button and press it shortly again. Rotate the "S" wheel to select your preferred LED color. Confirm by turning the alarm off by holding the red "Power" button for two seconds.

Position LEDs for night fishing: With the alarm on, the position LEDs can be turned on or off by briefly pressing the red "Power" button.

Pairing the alarm with the receiver: With the receiver off and the alarm on, press and hold the "P" button on the receiver’s side. Simultaneously, move the pin switch to ON (left side). Hold the "P" button until the blue and red LEDs light up. Once lit, release the "P" button. Now quickly press the "P" button to select the desired color and simulate a bite on the alarm you want to pair. To complete pairing successfully, turn the receiver off and on again.

Range test: With the alarm off, press and hold the red "Power" button for 7 seconds. The alarm will emit 3 short beeps and a fourth, distinct longer beep. Keep holding until you hear a continuous fast beep and the LEDs start flashing. You can then move away with the receiver from the alarm to accurately determine the signal reception distance.

NOTE: The effective range of both alarms and receiver is approximately 140m, depending on usage conditions (surrounding terrain, vegetation density, battery capacity). The alarms and receiver are sold in a rigid plastic carrying case, lined inside with foam material to protect against mechanical shocks and dirt. Both receiver and alarms are protected against water ingress at the speakers. The standard LED colors are red, yellow, and green.

WARNING!

- Although designed to operate in all weather conditions, do not submerge the alarms in water!
- If not using the alarm or receiver for extended periods, it is recommended to remove the batteries;
- Do not overtighten the alarms on supports to prevent damage;
- Despite the wide signal range, it is suggested to stay near the rods.

Alarm Features:

• Water-resistant ABS housing;
• Sensitivity adjustment button ("S") - 5 levels;
• Volume adjustment button ("V") - 5 levels;
• Selectable "Silent" mode (via "V" button);
• 5 different tones (selected using "S" wheel);
• 7 different colors for the LED signal light;
• Visual and audible signaling for "Drop Back" bites;
• Visual and audible signaling for "Run" bites;
• Automatic bite memory;
• Memory LED - lights continuously for 15 seconds;
• Position LEDs for night fishing;
• Encapsulated waterproof circuits;
• Socket for 2.5mm jack plug;
• Universal mounting thread (rubber protected);
• Low battery indicator - short beep;
• Operates with one 12V LR23A battery (not included).

Receiver Features:

• Water-resistant ABS housing;
• Metal On/Off pin switch;
• Volume adjustment button ("V") - 5 levels;
• Tone adjustment button ("T") - 5 levels;
• Selectable "Silent" mode (via "V" button);
• Vibration mode (activated by moving switch to the right);
• 4 LEDs indicating bites;
• Visual and audible signaling for "Drop Back" bites;
• Visual and audible signaling for "Run" bites;
• Automatic bite memory;
• Memory diode - lights continuously for 15 seconds;
• Encapsulated waterproof circuits;
• Low battery indicator - continuous beep;
• Operates with one 9V battery (not included).