Carp Expert Piave 3+1 Bite Alarm Set

Carp Expert Piave 3+1 Alarm Set

Startup:

Receiver: Insert 3 AAA 1.5V batteries as shown on the device. Battery insertion is easier after removing the hanger by moving the plastic ear located inside and on top, then pushing the hanger upward. The LED colors on the alarms are red, yellow, and green.

Alarm: Insert 1 9V battery into the device.

The station and alarms have a range of 150 meters and are rain-resistant.

Powering on and pairing:

The transmitter and receiver can be turned on separately by holding down a button for 3 seconds. A sound indicates the device is ready. After activation, the transmitters automatically connect to the receiver. If this does not happen, you can pair the devices as follows:

• 1. On the receiver, press and hold the "A" and "T" buttons simultaneously.
• 2. Meanwhile, turn the alarm dial to simulate a bite.
• 3. The receiver is ready to use.

Our devices can be turned off by pressing and holding the power button for 3 seconds.

Buttons:

Power on/off button.

• "V" Volume control button, 5 adjustment options.
• "S" Sensitivity adjustment button, 5 options. (To adjust the vibration function on the receiver)
• "T" Tone selection button, 5 adjustment options.

   

Bite indication:

The bite is signaled both audibly and visually. After the bite ends, both the receiver’s LED and the alarm’s LED indicate with a flashing light for 20 seconds. During the bite, the alarm sound intensifies or diminishes proportionally to the bite’s speed. The receiver indicates the bite with a continuous beep. Both the station and alarms have a "Mute" function. The station can notify of a bite in vibration mode with sound muted.

Additional feature:

The alarm can be fitted with two threaded metal rods that prevent the rod from detaching from the alarm during a bite. The bottom part features a standard outlet for electric swingers. Thanks to the standard threading, it can be mounted on all supports and rod pods.