Wireless Bite Alarm Set + Delphin SMART Receiver, 4+1

Wireless Bite Alarms Set + Delphin SMART Receiver, 4+1

Delphin SMART is the new range of electronic bite alarms from the manufacturer Delphin. Despite its compact size, Delphin SMART offers excellent bite indication through sound, light, and vibration. The bodies of the alarms and the receiver are made from a very rigid and durable plastic, contributing to their long lifespan. For maximum safety, the alarms and receiver come with a very sturdy carrying case.

The alarm is turned on by holding down the side-mounted V button. It features 5 different volume levels, including a mute mode where the bite is indicated only by light. You can also set one of four tones (T button) and four sensitivity levels (S button) according to your needs. The alarm retains its settings in memory, so you don’t need to reset them after each power on. Bites are indicated by an LED that flashes for 15 seconds after a bite. The alarm also includes night position LEDs, a non-slip rod holder, and a 2.5mm input for connecting a bite indicator light. It is powered by a 12V A23 battery, which, despite its minimal size, offers excellent battery life. When battery capacity is low, you will be warned by a short audible signal.

The receiver is noted for good signal reception at distances up to 140m (depending on the terrain). Using the buttons, you can set one of 5 volume levels (V button) and various alert tones (T button). Vibration or mute modes can also be activated. Like the alarms, the receiver stores all settings in memory. Additionally, it features a last bite memory function. After each bite, the LED will flash continuously for 15 seconds. The receiver is powered by three AAA 1.5V batteries, and when battery capacity is low, you will be alerted by a continuous audible signal.

WARNING!

- Although the alarms are designed to work in any weather conditions, do not submerge them in water!
- If you do not use the alarm or receiver for an extended period, it is recommended to remove the batteries;
- Do not screw the alarms too tightly onto the holders to avoid potential damage;
- Although the signal range of the alarms is very wide, we suggest staying close to the rods.

Alarm Features:

• ABS waterproof housing (100% waterproof);
• Tone adjustment button ("T") - 4 levels;
• Sensitivity adjustment button ("S") - 4 levels;
• Volume adjustment button ("V") - 5 levels;
• Selectable "Vibration" or "Silent" mode;
• Resin-encapsulated circuits with waterproof protection;
• Waterproof aluminum speaker;
• 2.5mm jack socket;
• Universal mounting thread;
• Powered by a 12V A23 battery.

Receiver Features:

• ABS waterproof housing (100% waterproof);
• Tone adjustment button ("T") - 4 levels;
• Volume adjustment button ("V") - 5 levels;
• Vibration function button;
• 5 signal LEDs;
• Resin-encapsulated circuits with waterproof protection;
• Waterproof aluminum speaker;
• Powered by 3 AAA 1.5V batteries.