Prologic SMX WTS Individual Bite Alarm

Prologic SMX WTS Individual Bite Alarm

The Prologic SMX WTS bite alarms feature buttons for volume adjustment ("V" - 5 levels), tone adjustment ("T" - 7 levels), and sensitivity adjustment ("S" - 4 levels). Volume, tone, and sensitivity each have independent setting levels. Using the universal thread, the alarms can be attached to any rodpod, tripod, buzz bar, or stake.

The alarm circuits are encapsulated in resin, providing a long service life. The alarms feature the classic PTFE magnetic roller with enhanced sensitivity, signaling every bite no matter how subtle. The roller of each alarm has an illumination function for nighttime use. The last bite memory function retains all settings for the next use, even if the battery is removed.

The alarms include "Drop Back LED" and "Drop Back Tone" functions that signal both visually and audibly when the line pulls back. Additionally, the alarms offer optical and sound signaling for "Run" bites (when the fish takes line). Each alarm is equipped with a port for connecting a 2.5mm jack to light swingers or hangers.

The housings of the alarms and the receiver are made from shock-resistant ABS and have waterproof protection. The alarms operate on two 1.5V AAA batteries, which ensure long-lasting operation. After fishing, it is recommended to remove the batteries and store them separately.

Each alarm has two extendable illuminated snag ears as stabilizers. These stabilizing ears also prevent the rod from being pulled off the support during strong bites.

NOTE: The Prologic SMX WTS Individual Bite Alarm can be connected with the Prologic SMX WTS 3+1 alarm set.

WARNING!

- Although the alarms are designed to work in any weather conditions, do not submerge them in water!
- If you do not use the alarm or receiver for an extended period, it is advisable to remove the batteries;
- Do not screw the alarms too tightly onto supports to avoid potential damage;
- Although the alarm signal range is very wide, we suggest staying close to your rods.

Alarm Features:

• Water-resistant ABS housing;
• Illuminated PTFE magnetic roller;
• Tone adjustment button ("T") - 7 levels;
• Sensitivity adjustment button ("S") - 4 levels;
• Volume adjustment button ("V") - 5 levels;
• "Drop Back LED" function for line return;
• "Drop Back Tone" function for line return;
• Resin-encapsulated circuits with water protection;
• 2.5mm jack port;
• Extendable illuminated snag ears (stabilizers);
• Universal thread mounting;
• Operates with two 1.5V AAA batteries.