Kamasan Electric Hook-Tying Tool, Comfort Model

Kamasan Electric Hook Tying Device, Comfort Model

Precisely tying small hooks can challenge even the most experienced anglers, as it's crucial that the line loses as little strength as possible. To avoid such issues, the Comfort model hook tying device is the ideal solution.

Using the electric device is quick and easy:

- Pull back the button that locks the hook and hold it down;
- Place the hook’s head in the groove between the two metal catches, pressing down until it disappears;
- When only the hook’s shank is visible, it means you’ve pressed down deeply enough;
- Release the hook locking button;
- Place the selected fishing line into the guiding slot so that the shorter end of the line is on top and the longer part exits through the device’s terminal end.
- Slide the end of the line under the metal locking buckle and slide it sideways until it stops;
- Before forming the loop, make sure the sliding loop fixing element is in the correct position;
- The sliding element should be opposite the fishing line guiding slot;
- If it’s not there, pull it into the correct position on the guiding rail;
- Pull the line end exiting the bottom of the device tight over the sliding element, directing it toward the hook, then pass it back into the upper line guide hole;
- The longer end of the line returns to its initial position. Pull back and hold down the tying button. The device will start wrapping the line around the hook. After 5-6 rotations, release the tying button;
- Slide the loop fixing element to the opposite side;
- Gently press the part remaining outside toward the opening until it tilts, releasing the previously fixed loop. Grab the line at the bottom end of the device and gently pull down until the loop enters and disappears;
- Pull back the button that locks the hook and remove the hook.