Delphin Coder Bite Alarm Set, 4+1

Delphin Coder Alarm Set, 4+1

Coder represents the new range of electronic alarms launched by Delphin in 2021. The alarms feature buttons for volume adjustment (the "V" dial - 5 levels of adjustment) as well as sensitivity (the "S" dial - 5 levels of adjustment). Additionally, the alarms include the smart "mute" function, allowing you to adjust the line sensitivity and then resume the sound signal (5 different tones). Thanks to the universal thread, the alarms can be attached to any type of rod pod, tripod, buzz bar, or bankstick.

The electronic circuits of the alarms are encapsulated, giving them a long lifespan. The alarms feature the classic roller characterized by heightened sensitivity, efficiently signaling both "Run" (the fish is moving away from the rod - the line tightens) and "Drop Back" (the fish is coming towards the rod - the line loosens) both visually and audibly. Each alarm is equipped with a standard socket for connecting a 2.5mm jack plug from swingers or illuminated hangers.

The alarms have an automatic bite recognition function built-in, with a special LED (top right) signaling brightly for 15 seconds (continuously) after each bite. The LED on the top left is responsible for the visual signal of bites, with 7 different colors available for you to select your favorite. The alarms allow LED settings as position lights (for night fishing) by briefly pressing the "Power" button.

The casing of both the alarms and the station is made of shock-resistant ABS and includes protection against water intrusion. The alarms operate with a LR23A 12V battery, providing long-lasting performance. When the battery is low, the alarms emit a short beep. After finishing your fishing session, it is recommended to remove the batteries and transport them separately.

The station features an automatic detection system with 4 channels (red, yellow, green, and blue) for easy synchronization of the alarms (the tone is identical to that of the alarm), a volume adjustment button (the "V" dial - 5 levels of adjustment, including silent mode), and a tone adjustment button (the "T" dial - 5 levels of adjustment). The metal On/Off switch with a pin has a dual function: turning the station on/off (tilting to the left) and activating the vibration function by moving it to the right. In the central position, the switch turns off the station.

The station operates with a 9V battery and has a built-in memory LED that signals brightly for 15 seconds (continuously) after each bite. When the battery is low, the station emits a continuous beep. On the side of the station's casing, there is a button marked with the letter "P" that synchronizes the alarms with the station.

Turning the alarm on and off: Press and hold the red "Power" button (located at the bottom of the casing) for two seconds. When the alarm opens, it will emit 3 beeps and both LEDs will flash 3 times. When you turn off the alarm, it will emit a single beep and the LEDs will flash once.

Setting the alarm tone: With the alarm off, hold the red "Power" button for 5 seconds. The alarm will emit 3 short beeps and a distinct longer fourth beep. After this signal, release the button and select the desired tone using the "S" dial. To confirm the selected tone, turn off the alarm by pressing the red "Power" button for two seconds.

Setting the LED colors: With the alarm off, hold the red "Power" button for 5 seconds. The alarm will emit 3 short beeps and a distinct longer fourth beep. After this signal, release the red "Power" button and immediately press it briefly again. By rotating the "S" dial, you will select the desired LED color. To confirm the selected color, turn off the alarm by pressing the red "Power" button for two seconds.

Position LEDs for night fishing: With the alarm on, the position LEDs can be turned on or off by briefly pressing the red "Power" button.

Pairing the alarm with the station: With the station off and the alarm on, press and hold the "P" button on the side of the station's casing. Simultaneously move the pin switch to the ON position (left side). Hold the "P" button until the blue and red LEDs light up. When these LEDs are lit, release the "P" button. Now quickly press the "P" button to select the desired color and simulate a bite on the alarm you want to pair. To successfully complete the pairing, turn the station off and on again.

Testing range: With the alarm off, press and hold the red "Power" button for 7 seconds. The alarm will emit 3 short beeps and a distinct longer fourth beep. Hold the button until you hear a rapid continuous beep and the LEDs start flashing. You can now move away from the station to accurately determine the distance at which it can receive the signal.

NOTE: The actual range of the alarms and the station is approximately 140m, depending on usage conditions (surrounding terrain, vegetation density, battery capacity). Both the alarms and the station come in a hard plastic transport case, lined internally with foam material to provide protection against mechanical shocks and dirt. The station and the alarms offer water protection for the speakers. The standard LED colors for the alarms are: red, yellow, green, and blue.

WARNING!

- Although the alarms are designed to work in any weather conditions, do not submerge them in water!
- If you do not use the alarm or station for an extended period, it is advisable to remove the batteries;
- Do not screw the alarms too tightly onto supports to prevent possible malfunctions;
- Although the signal range of the alarms is very wide, we suggest staying close to the rods.

Alarm features:

• Water-resistant ABS casing;
• Sensitivity adjustment button ("S") - 5 levels of adjustment;
• Volume adjustment button ("V") - 5 levels of adjustment;
• Silent mode selectable (from the "V" button);
• 5 different tones (selection using the "S" dial);
• 7 different colors for the visual signaling LED;
• Visual and audible signaling for "Drop Back" bites;
• Visual and audible signaling for "Run" bites;
• Automatic bite storage;
• Memory LED - signals continuously for 15 seconds;
• Position LEDs for night fishing;
• Encapsulated circuits with water protection;
• Socket for 2.5mm jack plug;
• Universal mounting thread (with rubber protection);
• Low battery indicator - short beep;
• Operates with a LR23A 12V battery (not included).

Station features:

• Water-resistant ABS casing;
• Metal On/Off switch;
• Volume adjustment button ("V") - 5 levels of adjustment;
• Tone adjustment button ("T") - 5 levels of adjustment;
• Silent mode selectable (from the "V" button);
• Vibration mode (activating the switch to the left);
• 4 LEDs for bite signaling;
• Visual and audible signaling for "Drop Back" bites;
• Visual and audible signaling for "Run" bites;
• Automatic bite storage;
• Memory diode - signals continuously for 15 seconds;
• Encapsulated circuits with water protection;
• Low battery indicator - continuous beep;
• Operates with a 9V battery (not included).